Computers & Writing Systems
SIL IPA and SIL IPA93 (legacy) fonts – FAQ
Please note that the Doulos SIL font and Charis SIL font fonts provide Unicode IPA support. However, you must convert existing data using the "SIL IPA93 Fonts" to Unicode before using the Doulos SIL or Charis SIL font (see SIL IPA93 Data Conversion).
For a good discussion on making the decision of which font to use, read IPA Transcription with SIL Fonts.
Converting IPA93 encoded data to Unicode
Question: I have MS Word documents which use your SIL IPA93 fonts, but I want to begin using Unicode. Can you tell me how to convert my data to Unicode?
Answer: As you have implied, documents which were created (encoded) with legacy fonts are not compatible with Unicode fonts. You not only need to use a Unicode font, you will need to convert your data to Unicode.
Since you have MS Word documents it might be a straightforward problem. These instructions should work if you have MS Word 2003:
SIL Converters Word Macro
We hope your data will have converted correctly! These instructions are for converting your data in one document. Once you have tried it for one document and understand the concepts, you might want to use the Bulk Word Document Converter. () to do all your documents in one go. At this point we do not have step-by-step instructions, but basically you select your documents, choose your fonts, converter and font to apply.
If you do not have MS Word 2003 and want to try an older version of SIL Converters 2.5, you can try: SILConverters — Obsolete version. However, this version does not always work correctly and we are not providing any support for this product.
Converting data to Unicode is not always straightforward and we do not have all the answers.
Question: I have plain text files which use your SIL IPA93 fonts, but I want to begin using Unicode. Can you tell me how to convert my data to Unicode?
Question: I have Standard Format Marker (sfm) text files and want to convert only one or two of the sf markers from an SIL IPA93 encoding to Unicode. Can I do that?
Answer: the Bulk SFM Converter will easily handle doing this.
Which fonts should I use?
Question: How do I know whether to use the SIL IPA93 fonts or the SIL IPA fonts?
Answer: The SIL IPA93 fonts are usually a better choice than the SIL IPA fonts, for several reasons:
Question: What are the names of the SIL IPA fonts?
IPA’s 1990 revision, including “Kiel” revisions, released as SIL IPA 1.2, now obsolete.
SIL IPA fonts
IPA’s 1993 revision, released as SIL IPA93 2.0.
SIL IPA93 or IPA93 fonts
Question: I have downloaded the SIL IPA fonts. Now what do I do?
SIL IPA93 (Windows 3.1, 95, 98, Me)
The SILIPA93.EXE is a setup program containing the SIL IPA93 fonts and documentation. All you need to do is double click on it with the mouse. This will install the fonts and documentation into Windows for you. You do not need to use .
SIL IPA (Windows 3.1, 95, 98, Me)
The SILIP12A.EXE is a self-extracting file containing the SIL IPA fonts, documentation and installation program. The first thing you must do is place the SILIP12A.EXE in a temporary directory on your hard drive. Then at the DOS prompt type “silip12a” OR in Windows, open or and find the SILIP12A.EXE file and double click on it with the mouse. In both cases this will extract the files contained in the SILIP12A.EXE file. Then use or to double click on the INSTALL.EXE program. (Note that does not always update the screen after you extract the files from SILIP12A. You can press F5 to update the screen). The install program will install the fonts into Windows for you. You do not need to use .
SIL IPA93 (Windows NT4, 2000, XP)
Run the installation program (SILIPA93.EXE) as described above, which will copy the font files to the WINNT (or Windows)System folder. Then, install the fonts through the , as follows:
(Alternatively, the fonts can be moved from the WINNT (or Windows)System folder to the WINNT (or Windows)Fonts folder using .)
SIL IPA (Windows NT4, 2000, XP)
The SIL IPA installation program does not run in Windows NT4, 2000, or XP. We recommend using the SIL IPA93 fonts instead. However, the fonts, documentation, shortcuts, etc. can be installed manually.
To begin the process, double-click the SILIP12A.EXE download file as described above, which will extract the files contained in the SILIP12A.EXE file. Three folders will be created:
The SIL IPA fonts files appropriate for use with Windows NT4, 2000, or XP are as follows:
The manual installation process is as follows:
Please note that the SIL IPA fonts package includes keyboard files for using Keyman 3.2 with the SIL IPA fonts. Keyman 3.2 does not run in Windows NT/2000/XP. Keyman 6, the current version, runs in Windows 95/98/Me/NT/2000/XP, but the keyboard files for Keyman 3.2 are not compatible with Keyman 6. The .kmn keyboard file provided in the SIL IPA fonts package could be updated to be compatible with Keyman 6, but SIL does not offer such an updated keyboard file.
SIL IPA93 and SIL IPA (Macintosh System 7-9)
To use the TrueType version of the fonts you must be running System 7 or later (or System 6.0.5 or later with TrueType INIT). To install the fonts, drag the TrueType suitcases of the fonts onto your closed System Folder (use the Font/DA Mover with System 6). Consult your Macintosh documentation for additional help.
SIL IPA93 (Macintosh OS X)
In order to install fonts in Mac OS X, you will need to be sure you have both read and write access to the Fonts folder located in the Library folder. Open the Library folder and select the Fonts folder. In the , click on , then on . In the palette that opens, check to be sure that is set to . (If the pop-up menus are grayed out, click the padlock icon to unlock the pop-up menus.)
In OS X, fonts may be placed in four different places: (a) the Library:Fonts folder in the Home directory of a user account; (b) the Library:Fonts folder; (c) the Library:Fonts folder in the Mac OS X System folder; and (d) the Fonts folder in the OS 9.2 ("Classic") System folder.
Fonts in (a) are usable only to the user of that account. Fonts in (b) are available to all users. Fonts in (c) are also available to all users, but are essential for system use. Fonts in (d) are used by Classic applications, as well as by applications running in OS X.
In all cases, the fonts must all be "loose" in the System:Fonts folder or Library:Fonts folder — not grouped in family folders — or the system cannot see them.
Installing the SIL IPA93 fonts in Mac OS X
Question: I am trying to install your SIL IPA93 fonts onto my computer running Windows 2000. I install the fonts and everything works fine. However, after the computer is restarted, the fonts disappear. They are not listed as being installed. Do you have any suggestions?
Answer: Unfortunately, the setup program for the SIL Encore IPA93 Fonts does not install fonts properly in Windows 2000 or Windows XP. (It was developed before Windows 2000 was released.) It copies the font files to the WINNTSystem folder instead of the WINNTFonts folder. In order to install the fonts properly, they should be installed through the . See above.
Question: When I tried to install the SIL Encore IPA93 fonts in Windows 2000 or XP, I got this error message:
C:WINDOWSSYSTEM32AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close" to terminate the application.
What is the problem? How can I install the fonts?
Answer: The problem is probably a bad or missing autoexec.nt file (probably missing). This file (as well as config.nt) does not always exist on Windows 2000 and Windows XP installations. Autoexec.nt and Config.nt are used to initialize a DOS environment for applications that use a DOS environment for their processing.
There should be autoexec.nt and config.nt files (plain text files) in the system32 folder in your Windows folder. (Note: the Windows folder may be named either WINDOWS or WINNT. The error message above shows that the Windows folder is named WINDOWS on this computer. The instructions below assume the Windows folder is named WINDOWS.) If the autoexec.nt and config.nt files do not exist, you will need to create them as follows:
1. Start up Notepad.
2. Copy or type the following text into your Notepad document window:
lh %SystemRoot%system32mscdexnt.exe lh %SystemRoot%system32redir lh %SystemRoot%system32dosx SET BLASTER=A220 I5 D1 P330 T3
3. Click on.
4. In the WINDOWS folder, then to the system32 folder.drop-down box, navigate to your
5. Give the file the name autoexec.nt. For choose .
7. Click on.
8. Copy or type the following text into your Notepad document window:
9. Click on.
10. In the WINDOWS folder, then to the system32 folder.drop-down box, navigate to your
11. Give the file the name config.nt. For choose .
13. Shut down Notepad, and restart Windows.
Install the fonts, following the installation instructions above.
Question: How do I uninstall the SIL IPA or IPA93 fonts?
Answer: To uninstall the fonts:
SIL IPA93 (Windows 95, 98, Me)
SIL IPA (Windows 95, 98, Me)
SIL IPA93 (Windows NT4, 2000, XP)
SIL IPA (Windows NT4, 2000, XP)
SIL IPA93 and IPA (Macintosh)
Typing with the fonts
Question: I have tried to use the IPA fonts to transcribe some words, but I can't access several characters. The directions say that you can get a different character by typing n< or n> or n=, but I don't get the "ng" character or whatever, just "n<".
Answer: In order to use the keystrokes you described, Keyman must be installed and running, with the appropriate keyboard loaded and activated.
For more information, please see the answer to the question below.
Question: Do the SIL IPA and IPA93 fonts include all the IPA characters? I downloaded and installed the fonts, but I can't find all the symbols I need, such as the schwa or open O!
Answer: The SIL IPA and IPA93 fonts include the phonetic symbols included in the International Phonetic Alphabet as of 1990 (IPA) or 1993 (IPA93). The current IPA is available at the website of the International Phonetic Association.
Other phonetic symbols have been used at various times and in various contexts, but are not included in the 1990 or 1993 IPA standards.
Please note also that only about half of the IPA characters can be typed directly on the keyboard. However, the documentation included with the fonts shows all the characters that are included in the fonts.
If you have installed the SIL IPA or IPA93 fonts in Windows 95 or later using the default settings for the installation, the documentation for the fonts should be in the following locations:
SIL IPA fonts:
Documentation is in C:WindowsIpafonts.
fonts.hlp — Help file for SIL IPA fonts
ipachars.wri — Document listing the characters and access codes
ipakeys.hlp — Help file for accessing IPA characters from the keyboard using Keyman instead of access codes
ipawin.wri — User's Guide for SIL IPA fonts
These documents may also be accessed from themenu, by clicking on , then .
SIL IPA93 fonts:
Documentation is in C:Program FilesIpa93.
Fonts93.hlp — Help file for SIL IPA93 fonts
IPA93 ReadMe (Ipa93.doc) — Document listing the characters and access codes
Ipa93key.hlp — Help file for accessing IPA93 characters from the keyboard using Keyman instead of access codes
Keyman Text ReadMe (Keyman.txt) — Instructions for downloading and installing Keyman 3.2
Packing List ReadMe (Packing.lst) — List of files included in the SIL IPA93 fonts package
Readme First ReadMe (Readme.txt) — Introduction to the SIL IPA93 fonts package
These documents may also be accessed from themenu, by clicking on , then .
As the documentation shows, there are many characters located at code points above ANSI 127. These can be accessed in two ways. For the Alt key and type the character’s access code on the number pad at the right end of your keyboard (be sure the NumLock is on) or if you have installed Keyman and have it running with the IPA or IPA93 keyboard active, you can use multiple key strokes. For example, if you want the schwa you could:version you can hold down the
You can download Keyman from here. The Keyman keying sequences are found in the and files, and the ANSI codes can be found in the and the files. The keyboard files for using Keyman 3.2 with the SIL IPA and IPA93 fonts are included with Keyman 3.2. The keyboard file for using Keyman 5.0 or 6.0 with the SIL IPA93 fonts is available here.
To type IPA characters using the SIL IPA93 fonts and Keyman 5.0 or 6.0 in Windows 95 or later,
If you enter the characters directly from the keyboard without using Keyman (i.e., using the Alt key plus the access code listed in the file), keep in mind the following:
(If you use Keyman, you don't have to worry about all this — it takes care of it automatically.)
Please note also that mixing characters from different typefaces within words is problematic; you can expect to have problems with character fit.
Accessing the characters on the User’s Guide shows all the characters and how to access them. For example, if you want the:platform is very similar. The
You can also use the Macintosh utility SILKey to type using multiple keystrokes. The Keyboard DOC file lists all the keying combinations. The keyboard file for using SILKey with the SIL IPA93 fonts is included with SILKey.
You can view all the IPA characters using the Windows programfound in the folder or the Macintosh program .
Question: Why didn’t you include upper case and full punctuation in the font? I need it!
Answer: These inclusions would have severely limited the number of IPA characters included in the font. We chose to provide as complete a solution as is possible in one font for the display and publication of phonetic text using the current IPA, but without the extras. All the extras are included in the full release of SIL Encore Fonts.
Question: Some of the characters that I use are not included (the Greek iota, the small cap “U”, the closed omega, the t-esh and d-yogh ligatures, and others).
These were standard IPA characters until 1989/1990 when the IPA officially made them “non-standard” in favor of other symbols. Due to font size limitations, we chose to include only the current IPA characters in the fonts.
Question: I want to put the tilde over the o-e digraph and it goes directly over the e-part instead of right in the middle. Is there any way to solve this problem?
Answer: Not easily. We elected to provide “o-width” and “i-width” diacritics only. If there had been space in the font, we would have included “m-width,” which would suit your purpose. There is one (painful) work around. If your application supports manual kerning, you might be able to kern the vowel and diacritic closer together (moving the diacritic toward the center of the vowel). You will then have to kern the diacritic and next character farther apart by an equal amount to ensure that the next character is spaced correctly. You might even be able to set up a macro to do this on command.
Question: Whenever I type an IPA character in the same line with some other font (such as Times New Roman), it messes up my line spacing. What should I do about this?
Answer: Line spacing can be problem when mixing typefaces. The SIL Encore IPA Fonts were designed to have greater automatic line spacing to allow for the very high and very low diacritics in the font (without crashing into the line above or below). Hence any line containing an IPA character will have its automatic line spacing altered.
Many programs, however, allow you to control the line spacing manually. For example, in Word for Windows, select the paragraph and choose(under the menu). Set to “Exactly” or “At Least,” and the point size you desire. Many users actually prefer this method even for everyday use because they don’t like the “Auto” line spacing that is given. You can even preset the line spacing in your “Normal” text style and alter it as needed for the point size of the text.
Question: When I use diacritics, the end of the line gets chopped off and my cursor is in the wrong place.
Answer: This is sometimes caused by the screen driver. Be sure you are using the latest drivers available for your video card. You might also try switching to the standard VGA driver included with Windows. If that does not solve the problem, contact us. Most Windows applications do not support zero-width or non-spacing diacritics, so we have had to modify the fonts to avoid the problem. Usually our work-around is successful, but not always.
IPA/IPA93 Diacritics Not Printing
Question: I am having difficulty printing diacritics using both the SIL Doulos font (with Win3.11) and SIL Doulos 93 (with Win 98). I can see the diacritics on screen, but they do not print. The remaining phonetic symbols print normally.
In both cases (on different computers) I am using diacritics as tone marks which appear above other consonant and vowel symbols. Each word uses only a single SIL font, not mixed with any other fonts.
If you can give me any suggestions, I would be most grateful.
Answer: The diacritics in the SIL IPA and IPA93 fonts use a very narrow space as the base character, with the diacritic above and to the left of it. Unfortunately, some printer drivers do not interpret this type of character correctly.
See if there’s an option to “Print TrueType as Graphics” or to select raster graphics in the printer driver. (Click on thebutton, then on , then on . Right-click on the icon for your printer, and select . Look on all the tabs in the dialog for a check box labeled “Print TrueType as Graphics” or “Raster Graphics”. If you find such a choice, select it, then click as many times as required to close the dialog. Then try printing your document again.
You might also check the version of your printer driver. In thedialog, look for a button labeled “About”. If you find such a button, click on it. The version of the driver will be displayed. Alternatively, if you can find the floppy disk(s) or CD-ROM that was used to load the driver when the printer was installed, see if there’s a version number on it. Then check the website of the printer manufacturer to see if a newer driver is available. Installing the latest driver may solve the problem.
If this doesn’t work and you have a means for creating PDFs (either with Adobe Acrobat (the complete package including Distiller, not just the Acrobat Reader) or another application that creates PDFs), you might try making a PDF of your document and see if that works. (pdf995, a free utility for creating PDFs, is available at www.software995.com.)
If there’s no “raster mode/ttf as graphics” option in the printer driver, and you don’t have a means for creating a PDF, you might try using the free utility “GSView” (a Ghostscript/Ghostview package for Windows, available from http://www.cs.wisc.edu/~ghost/gsview/).
Install a PostScript printer driver on your computer, then install GSView. From your application (Word or whatever), print to a file, using the PostScript printer driver (this generates a PostScript file of the document), then open the file in GSView and print it on your printer.
Question: When I type diacritics the diacritic wipes out the base character. I have a video card with ATI’s Mach32 chip.
Answer: There is an incompatibility between some ATI video drivers and fonts that contain “minute-width” diacritics (like the SIL Encore IPA Fonts). When these “non-spacing” diacritics are typed, they can seem to wipe out the image of the base character.
This only seems to effect video cards that contain ATI’s Mach32 chip. This includes the Ultra Pro and Ultra Plus cards (the original Ultra is OK), as well as any on board video that contains the chip (like some AST Premmia systems).
If you are using Windows 3.1, a work-around is as follows:
Unfortunately this will slow down video performance. WINBENCH results are 16 million withon and only 7 million with them turned off. For most purposes, though, there will be little noticeable difference in speed.
Question: When I try to type the characters on the single quote key, I never get what I want.
Answer: Turn off the option in your program.
Question: My fonts look right when I first enter them, but when I reload my document, they’re all messed up!
Answer: The IPA fonts are identified to Windows applications as symbol fonts. Some Windows 3.1 applications, including Write, have a problem with symbol fonts. If you are using Windows 3.1, edit your WIN.INI file. Go to the [fonts] section and find the listing for the IPA93 fonts (SILDoulos IPA93 Regular, etc.). Move it to the top of the [fonts] section. This should eliminate the problem.
Using the fonts in certain applications
Question: Will these fonts work in word processors other than Microsoft Word?
Question: I want to enter IPA93 characters in MS Works/WordPad. I recently downloaded your IPA93 fonts, and got the list of glyph access codes from the folder. However, the code for the turned A is incorrect. The code listed is 140, but when I type Alt 140 an h-type character appears, and when I type Alt 0140 , a glottal stop appears.
Answer: This problem occurs with both WordPad and with Works, and appears to be a bug in the WordPad and Works programs. We have discovered this type of problem occurs with the following characters in the SIL Encore IPA93 fonts:
A work-around is to type the character (access code) in Times New Roman, then change the font to the desired IPA93 font.
Question: Will these fonts work in Ventura Publisher for Windows?
Answer: That depends on the version of Ventura you are using. There should be no problems in versions 5.0 and later. However, in versions 4.2 and earlier not all characters will be accessible. For compatibility with text files from previous versions, Ventura used its own character set. Supporting full character access with Ventura 4.x and earlier would have severely limited the number of characters in the font. Ventura 4.x users will be better served by the full release of the SIL Encore Fonts. (Click here for information on the SIL Encore Fonts.)
Question: My documents with SIL IPA93 fonts are no longer visible in Word 2004. What can I do to make them visible?
Answer: We are grateful to David Kamholz for the following information:
The characters were encoded in the ordinary 8-bit ASCII ranges and, there is no way to view them properly in Word 2004 in that encoding. I’ve written the following macro, which does a character by character search and replace to fix the characters. It finds only characters in the font specified. I also noticed that for some reason tabs and newlines in the SIL font were a problem, and could not be converted to the new encoding, nor left alone, because they displayed as rectangles that way (although the tab and newline formatting still worked). So I changed these to another font — Times New Roman in this case, but you can just edit the string in the macro.
Instructions for creating and running this macro:
Question: Word 2004 for Macintosh seems to have problems with the SIL IPA93 fonts.
I get rectangles, instead of characters, in documents. On the "insert symbol" menu, the characters show up as Roman alphabet characters, evidently from some other font. It's not just a problem with the screen display. The characters print as rectangles as well.
Question: Is it possible to create a new document in Word 2004 for Macintosh using the IPA93 fonts?
I tried to create a document in Word 2004 using the IPA93 fonts. I selected SILDoulos IPA93, and started typing. As soon as I typed the first letter, the font switched to Times New Roman. Word would not let me type letters in Doulos IPA93.
I tried to use Insert Symbol. The Font drop-down list in the Insert Symbol dialog did not list SILDoulos IPA93, so I typed the name in the Font box, and pressed Return. The character set that was displayed was the standard Mac character set.
Question: Is it possible to open an existing document (even plain text) that uses the IPA93 fonts in Word 2004 for Macintosh?
I created a document in Word X using Doulos IPA93, and saved the document in five formats: Word X, Word 4, Word 5.1, RTF, Unicode Text (UTF-16), and Text Only with Line Breaks. Then I opened each document in Word 2004. Here's what happened:
Answer: See above.
If the previous question and answer did not solve you problem, read on.
We have tested Word 2004 for Macintosh with the SIL IPA93 fonts and have confirmed that they "do not play well together." The problem is due to incompatibilities between the encoding of the SIL IPA93 fonts and Word's mapping to Unicode.
(Basically, the SIL IPA93 fonts are encoded as symbol fonts rather than normal text fonts (because doing so enabled more characters to be included in the font). Back when the IPA93 fonts were developed, in the days of Windows 3.1, Mac OS 7, and Word 2-6, Word treated symbol fonts and normal text fonts in the same way. However, beginning with Word 98/98, Word began treating symbol fonts and normal text fonts differently. Symbol fonts were assumed to contain symbols, not word-building characters. When Word mapped the characters between the old-style 8-bit encoding used in Windows 3.1 and Mac OS 7-9 and Unicode encoding, characters from symbol fonts were mapped to an area of Unicode called the Private Use Area (PUA) rather than the language-specific ranges of Unicode. The rectangles that appear when you open an existing document using the SIL IPA93 fonts in Word 2004 is due to the mapping of the characters in the file to the PUA.
Here's a summary of what we understand to be the case at this point.
First, here's a little background that will help the explanation that follows make sense:
With that background, let's move forward:
Creating new documents with Word 2004 and the SIL IPA93 fonts
Based on a few experiments, we believe it is possible for Word 2004 to display the characters in the IPA93 fonts if (a) you ensure that these fonts are NOT named as Symbol fonts in the WFS file, and (b) the document contains the PUA characters F020..F0FF. However, these characters cannot be entered with a regular English keyboard; you'll need a keyboard that generates characters in that PUA range. Until a user-friendly PUA keyboard layout is created, you will have to choose between (tediously) entering the characters as Unicode hex values using the Hex Input keyboard, or (tediously) inserting the characters via the Character Palate. (These keyboards can be enabled through System Preferences/Personal/International/Input Menu.)
Tools and documentation for creating a PUA keyboard are available here. In particular, Ukelele could be used to build a PUA layout. (However, we are not aware of any such product currently available.)
Viewing existing documents that use the SIL IPA93 fonts in Word 2004
For existing documents, if the user had defined the IPA fonts as Symbol fonts in WFS, then what actually gets saved in the document is the PUA codes. Then, if you remove those definitions from WFS and open the file in Word 2004, they should show up as expected.
If the existing document was created without the IPA fonts being defined as Symbol fonts, then we assume what gets saved is regular Latin character codes, and Word 2004 won't be able to display these with the IPA fonts. (Macros to fix up this situation could perhaps be written, but we are not aware of any such product currently available.)
So in summary, using the SIL IPA93 fonts with Word 2004 is fairly difficult at this time. You're probably better off staying with Word X when using the SIL IPA93 fonts.
Question: When using the SIL IPA93 fonts with Quark XPress (Mac) we are unable to attribute the fonts correctly (bold, italic, bold italic) even though your documentation says that the attributes are included. (And I see that they are in the suitcase.) Specifically I do not see the font family when choosing the font in Quark, just the main font. Furthermore we’re finding that if we give the fonts attributes using the menu they are not holding when PDF’s are made of the file. In fact I’ve been unable to make a PDF of the document that includes even the roman version of the font.
Question: I am formatting a book in Quark XPress 4.x for Macintosh. A small portion of text is done using SILDoulos IPA93. The original text was typed in Microsoft Word. The SILDoulos IPA93 fonts print OK from Word but not from Quark XPress (prints in Courier). The fonts always look OK on screen.
In XPress, I have tried creating a PDF. If created by first writing a postscript file and then distilling using Acrobat Distiller 4.05 the SILDoulos
If the PDF is written via PDFwriter the SILDoulos IPA93 are OK.
I have downloaded a new copy of the fonts and installed ‘Font Cache Extender’. Still no good. It doesn’t make a difference whether installing the font directly within the font folder of the system or elsewhere using Suitcase 8.2.
Answer: Several users of the SIL IPA93 fonts and Quark XPress for Macintosh have reported incompatibilities between the fonts and XPress. They report that the IPA93 fonts will work in other applications, but not in Quark XPress. XPress not only has problems recognizing the fonts, but when writing a PostScript file, XPress substitutes Courier for the IPA93 fonts. We understand that XPress uses its own Postscript driver, not the standard system driver, and this means that it will be handling font access, downloading, etc. by itself, which is why it behaves differently than other applications.
Unfortunately, we have not found a solution.
One user reported that he was able to make a PDF successfully with PDFWriter, but not with Distiller.
Another user reported that the fonts work and distill properly when used in MS Word and Adobe Illustrator, but not in Adobe InDesign. (However, we have used them successfully in Adobe InDesign.)
If there is a way to make XPress use the standard printer driver instead of "doing its own thing," that might be worth a try.
Ifis available in XPress, try turning it off.
Of course, the fonts themselves must be installed in the correct locations. In OS 7-9, fonts should be placed in the Fonts folder in the OS System folder. In OS X, fonts may be placed in four different places:
Fonts in (a) are usable only to the user of that account. Fonts in (b) are available to all users. Fonts in (c) are also available to all users, but are essential for system use. Fonts in (d) are used by Classic applications, as well as by applications running in OS X. In all cases, the fonts must all be “loose” in thefolder or folder -– not grouped in family folders -– or the system cannot see them.
Question: Using SIL IPA Fonts With WordPerfect
Answer: We are indebted to Professor John Wells of University College London for the information that follows.
In order to use the SIL IPA fonts with WordPerfect, it will be necessary to disable some of the WPWin Quickcorrect functions: from, choose , then ; then in turn off , and turn off the quotes under both and . This prevents odd behavior when the quotes key is pressed with an SIL IPA font selected.
When printing with the SIL IPA fonts, make sure to choose the Windows printer driver (not the WordPerfect printer driver). You may also encounter a problem printing certain characters – particularly diacritics – in the SIL IPA fonts. To avoid this, set the code page within Wordperfect 8 as follows:
The SIL Encore IPA and SIL IPA93 fonts are obsolete, symbol-encoded fonts. Their use is discouraged. If you decide to download and use these fonts, please note there is no user support for these fonts.
Please note that these fonts are intended for use by experienced computer users. Installing and using these fonts is not a trivial matter. The most effective technical support is usually provided by an experienced computer user who can personally sit down with you at your computer to troubleshoot the problem.
If you are having difficulty, be sure to do the following:
Note: If you want to add a response to this article, you need to enable cookies in your browser, and then restart your browser.
Note: the opinions expressed in submitted contributions below do not necessarily reflect the opinions of our website.
© 2003-2020 SIL International, all rights reserved, unless otherwise noted elsewhere on this page.